Solar Panels For Tiny House — Authentic 3KW 24V 120V LiFePO4 Bluetooth 4 x 200W SGKT-3PRO
The solar panels for tiny house SGKT-3PRO delivers a complete 3000W 24V 120V solar kit with 4 x 200W monocrystalline panels — 2 x 24V 100AH LiFePO4 batteries with Bluetooth monitoring — and a 3000W 24V solar inverter — the most compact and lightweight complete solar kit in this product range. Designed specifically for tiny houses compact cabins RV applications and any installation where a smaller footprint lower cost entry point and Bluetooth battery monitoring are the priority.
Table of Contents
- Product Details
- About The 3KW Tiny House Kit
- Solar Panels For Tiny House
- Tiny Home Solar Panels
- Bluetooth Battery Monitoring
- What Is Included
- FAQ
Product Details
| Detail | Value |
|---|---|
| Model | SGKT-3PRO |
| Inverter | 3000W 24VDC 120VAC |
| Solar Panels | 4 x 200W Monocrystalline |
| Total Solar Capacity | 800W |
| Battery Storage | 2 x 24V 100AH LiFePO4 Bluetooth |
| Extension Cables | 1 x 50ft |
| Mounting | 4 sets Z-Brackets |
About The 3KW Tiny House Kit
The solar panels for tiny house SGKT-3PRO is the most compact and entry-accessible complete solar kit in this product range — a 3000W 24V system that precisely targets the energy requirements of tiny houses compact cabins RV installations and any small off-grid application where a lower initial cost and minimal system complexity are the priority over maximum capacity.
The 24V system architecture is the standard configuration for entry-level off-grid solar — simpler to wire and commission than 48V systems while delivering sufficient capacity for the typical loads of a tiny house or compact cabin. The Bluetooth-enabled LiFePO4 batteries allow real-time monitoring of battery state of charge voltage and temperature directly from a smartphone — providing the system visibility that off-grid owners rely on for confident daily energy management.
Solar Panels For Tiny House
The solar panels for tiny house 200W monocrystalline format in the SGKT-3PRO is specifically suited to the installation constraints of tiny house construction:
- Compact Dimensions — 200W panels are significantly smaller than full-size 415W or 450W alternatives — fitting on the compact and often irregular rooflines of tiny house construction without complex custom mounting solutions
- Low Weight — the lightweight format reduces structural load on tiny house roof construction — important where roof framing is designed for minimal weight
- Monocrystalline Efficiency — maximum output per square inch of panel area — essential when tiny house roof space is the primary constraint on system capacity
- Expandable — additional 200W panels can be added to the 3000W inverter input capacity as energy requirements grow beyond the initial 800W array
Tiny Home Solar Panels
Tiny home solar panels requirements differ from standard residential solar in several important ways — and the SGKT-3PRO addresses each:
- Size — compact 200W panels fit tiny home roof surfaces that larger format alternatives cannot
- Weight — low panel weight minimises structural impact on tiny home construction
- System Simplicity — 3000W 24V single-inverter architecture is simpler to install and maintain than larger multi-component systems
- Bluetooth Monitoring — built-in battery Bluetooth enables real-time monitoring without additional monitoring hardware or WiFi infrastructure
- Cost — lower entry cost than larger systems allows tiny home builders to start generating solar power before budget allows a full-scale installation
Browse our full Tiny House Solar Kits and Small Solar Systems collections for more options.
Bluetooth Battery Monitoring
The 2 x 24V 100AH LiFePO4 batteries in the SGKT-3PRO include built-in Bluetooth monitoring — connecting directly to a smartphone app to display real-time battery state of charge voltage current and temperature without requiring additional monitoring hardware or WiFi connectivity. This makes the SGKT-3PRO particularly suitable for remote tiny home and cabin installations where internet connectivity may be limited or unavailable.
What Is Included
- 1 x 3000W 24VDC 120VAC Solar Inverter
- 4 x 200W Monocrystalline Solar Panels
- 2 x 24V 100AH LiFePO4 Battery with Bluetooth
- 4 sets Mounting Z-Brackets
- 1 x 50ft Solar Extension Cables
Frequently Asked Questions
Q: What is the solar panels for tiny house SGKT-3PRO? The solar panels for tiny house SGKT-3PRO is a complete 3000W 24V 120V kit — 4 x 200W monocrystalline panels — 2 x 24V 100AH LiFePO4 batteries with Bluetooth — 4 sets mounting brackets — the most compact and entry-accessible solar kit in this product range for tiny houses cabins and RVs.
Q: What are the tiny home solar panels in this kit? Tiny home solar panels in the SGKT-3PRO are 200W monocrystalline panels — compact lightweight and efficient — fitting on small irregular tiny home roof surfaces where larger format panels cannot — delivering monocrystalline silicon efficiency in the smallest practical rigid panel format.
Q: Why is 24V better for a tiny house solar system? The 24V system architecture in the SGKT-3PRO is simpler to wire and commission than 48V alternatives — appropriate for the 3000W output level and the straightforward energy requirements of tiny houses and compact cabins — reducing system complexity and installation cost for entry-level off-grid applications.
Q: What does the Bluetooth battery monitoring provide? The built-in Bluetooth in the LiFePO4 batteries connects directly to a smartphone app — displaying real-time battery state of charge voltage current and temperature without requiring WiFi infrastructure — ideal for remote tiny home and cabin locations where internet access may be limited.
Q: Can the SGKT-3PRO system be expanded? Yes — additional 200W monocrystalline panels can be added within the 3000W inverter input capacity — and additional compatible LiFePO4 batteries can expand storage capacity — making the SGKT-3PRO a genuine starting point for a growing tiny house or cabin solar installation.










Reviews
There are no reviews yet.